Stone steps can be built into any landscape in a relatively short amount of time so there’s still plenty of time this fall to check this project off your to-do list!

Stone has been a constant source for building for millennia. When it comes to building a set of stone steps there are a number of things to think about before you start.

First, you should determine what type of stone you are going to use. Whether you use a rough and rugged look or a smooth more sophisticated stone, you want to make sure your decision goes well with the setting taking into consideration how it pairs with topography and buildings.

Now that you have made that decision the layout is the next important thing to consider.

Typically any staircase should conform to standard building practices. 8″ of rise and at least 12″ of run is typical, but because of the medium there can be some small discrepancies involved. Try to keep the run short enough to keep it from making it awkward to walk up and down.

Preparation and calculating distances for the rise and run will help you choose the stone you are going to use for each step. Determining the number of steps is critical beforehand.

Find the run distance of the stairs and divide that by the number of steps less one step for the top step and this will tell you if you have enough steps to accomplish your build.

Preparing the base and installing drainage, if needed, and compacting the area are just a few more of the steps to getting it right when building stone steps or walkways.

Calgary Landscape Supplies has everything you need to bring your project to life. Give us a call at 403-818-5857 for an estimate on having us professionally install your stone steps for you. You’ll be happy you did!
.